Niko 10-286 Produktinformation Seite 35

• 3 function keys with visual indication (smart keys) for easy control
• Connection via 4-pole connector of the audio module 10-360
• Extra connection for splitting to another module
• Outgoing confirmation tone via central module (e.g. audio module)
• Visual error indication
• Resident database: 256 data sets (24 characters for the name, 6 digits for the flat number, 2 serial numbers per resident, call number of up to 10 digits for
direct dialing)
• Configuration only using Niko Configuration SW
Factory settings display module:
Time-out for backlight in automatic mode
Error detection "key is locked" (key pressed for
longer than 25 s)
2.4.3. Code lock module
Two-tone LED
1
OFF: in standby
ON red: 3 sec. – entered code denied
2 min – blocked after three wrong codes,
Blinking green: programming mode active
ON green: entered code approved (can be deactivated, duration adjustable)
Blinking ON green: programming mode started on the power supply and control unit
Blinking ON red and green (orange): combined error indication
Number keys
2
Input of access codes,
input of series of commands and parameters during config-uration
-key
3
Start series of commands during configuration in programming mode, interruption of
incomplete series of commands
-key
4
Complete entered commands and codes, separate parame-ters of entered commands (
example: 0 3 ),
Light function
Connection
5
Extra module with 4-pole connection cable (e.g. display module 10-362 or audio module
10-360)
Connection
6
Extra module with 4-pole connection cable (e.g. display module 10-362)
Connection bus and output
7
Technical data:
Housing
H x W x D
Weight
Short description:
• Keyboard with 12 keys for entering flat numbers, access codes and resident selection.
EN
30 s
25 s
Anodized aluminium
105 x 105 x 43 mm
210 g
10-286 / 10-386
1 2 3
4 5 6
7 8 9
0
10-363
EXT EXT a b P NO COM NC
5 6 7
1
2
4
3
35