Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting; Technical Specifications - Hozelock Green Power Installations- Und Gebrauchsanweisungen

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 6
2 Year Guarantee
If this product, becomes unserviceable within 2 years of the
date of purchase it will be repaired or replaced at our option
free of charge, unless in our opinion it has been damaged or
misused.
Liability is not accepted for damage due to accident, improper
installation or use. Liability is limited to replacement of a
faulty GREEN POWER.
This guarantee is not transferable. It does not affect your
statutory rights. To obtain the benefits of the guarantee,
firstly contact Hozelock Customer Services who may request
that the product is sent along with proof of purchase directly
to the address below.

Troubleshooting

Incidents
Causes
The device
No power
does not
supply.
heat up.
The switch
(D) is not in
the heating
position.
The plant
The device is
does not wilt.
not held close
enough to
the weed.
The
application
time is not
long enough.
For any other issues, please call our Customer Services
department at the below address.

Technical Specifications

Power
Voltage
Temperature at nozzle outlet,
approx.
Supply cable
IP rating
Insulation class
For product advice please contact:
Hozelock Customer Services,
Hozelock Ltd., Midpoint Park, Birmingham. B76 1AB. England.
Tel: +44 (0) 121 313 1122 • info@hozelock.com
www.hozelock.com
Solutions
Check that the plug is
properly inserted into the
socket.
Check the fuse.
Set the switch (Fig.2 item J)
to the 'heating' position.
Apply the nozzle properly to
the weed while letting it rest
on the ground.
The application time of the
nozzle on the weed may
take longer than 3 seconds.
If necessary, repeat the
application.
1600 watt
220V-240V 50Hz
600°C
0.3m
H05 RNF
IPX0
Contact
F
A
Cache de ciblage
B
Module électrique principal
C
Support de l'appareil
D
Interrupteur Marche / Ventilation / Arrêt
E
Ouïe d'aspiration d'air
F
Poignée ergonomique
G
Point d'accrochage
H
Câble électrique
Installation et Notice D'utilisation
LIRE CES INSTRUCTIONS ATTENTIVEMENT
AVANT D'ESSAYER D'UTILISER CE PRODUIT.
NÉGLIGER CES INSTRUCTIONS PEUT
ENTRAÎNER BLESSURE OU ENDOMMAGEMENT DU
PRODUIT.
GARDER EN TÊTE CES INSTRUCTIONS POUR DE
FUTURES UTILISATIONS.
CES INSTRUCTIONS SONT AUSSI DISPONIBLES SUR LE
SITE WEB HOZELOCK.
IMPOrTANT
• Ne pas utiliser le Green Power dans un environnement
présentant des risques d'explosion ou à proximité de
matériaux inflammables.
• Ne pas utiliser en zone aride pour éviter tout risque de feu.
• Ne pas diriger le courant d'air chaud vers des personnes ou
des animaux.
• Ne pas diriger le courant d'air chaud au-dessus de la
même zone pendant trop longtemps à cause des risques
d'incendie.
• S'assurer que la chaleur ne peut se propager vers des
matériaux inflammables cachés, et les enflammer.
• Après utilisation, poser le Green Power sur son support (fig
1. image C) en toute sécurité et le laisser se refroidir avant
de le ranger.
• Ne pas laisser le Green Power en marche sans surveillance.
• Ne pas exposer le Green Power à la pluie ou à l'humidité.
• Ne pas plonger le Green Power dans l'eau ou laisser de l'eau
s'introduire dans le produit.
• Débrancher le Green Power avant de le ranger.
• Ne pas toucher le cache de ciblage chaud (fig 1. image A).
• Ne pas laisser le câble électrique toucher le cache de ciblage
chaud.
• Ne jamais obstruer les ouïes d'aération (fig 1. image E).
• Ne pas utiliser le câble électrique pour transporter ou
ranger le Green Power.
• Ne pas essayer d'ouvrir ou modifier le Green Power, il ne
contient pas de pièces réutilisables.
• Si vous ajoutez une rallonge électrique, elle doit être
identique au câble du Green Power, avec une prise de
raccordement étanche.
• Si le Green Power est visiblement endommagé, ne pas
l'utiliser.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis