Installation And Connection - Livox Hub Betriebsanleitung - Kurzfassung

2. Overview
1
2
1. Livox Hub
2. Port Cover × 4
3. Status LEDs
* To view the ports on Livox Hub, unscrew and remove the port covers.

3. Installation and Connection

Mounting Livox Hub
Livox Hub is outfitted with four M3 mounting holes with a depth of 6 mm on the bottom, and it
can be mounted using M3 screws. Livox Hub is already mounted with the port covers. The port
covers can be removed if there are space constraints when mounting Livox Hub. However, it is
recommended to keep the port covers attached to Livox Hub. Only remove the port covers if
absolutely necessary. To remove the port covers, unscrew the screws.
Dimensions (with port covers):
Dimensions (without port covers) :
4
3
4. Dissipation Area
5. Livox LiDAR Port × 7
6. Livox LiDAR Port × 2
Livox Hub Quick Start Guide
6 7 8 9
5
7. Gigabit Ethernet Port
8. GPS Sync Port
9. Power Port
Unit: mm
Unit: mm
3