Livox Hub Betriebsanleitung - Kurzfassung Seite 4

Livox Hub Quick Start Guide
Warnings
1. DO NOT drop Livox Hub during mounting or transportation.
2. Liquid damage to Livox Hub is not covered by the warranty.
3. Livox Hub must be used together with Livox LiDAR sensors. Refer to the Livox LiDAR sensor's
user manual to check the usage of the LiDAR sensors.
4. Livox Hub is only compatible with Livox LiDAR sensors. DO NOT connect Livox Hub to other
LiDAR sensors.
5. When 20 or more Livox LiDAR sensors are connected to Livox Hub (note that a LIVOX MID
sensor unit contains three Livox LiDAR Mid-40 sensors), pay attention to heat dissipation due to
the high power consumption. It is recommended to use the port covers and avoid covering the
dissipation area of Livox Hub.
6. The maximum data bandwidth is 300 Mbps when nine Livox Mid-100 sensor units are connected
to Livox Hub.
7. Operating Livox Hub in a residential environment could cause radio interference.
8. The Livox Hub Quick Start Guide contains important information. Make sure to read before using
Livox Hub for the first time and keep the Quick Start Guide for reference.
1. Introduction
Livox Hub is a streamlined way to integrate and manage Livox LiDAR sensors and their data
output. The Livox LiDAR Software Development Kit (SDK) gives users unified access to software
and hardware, simplifying the development process to make it more efficient. Also available is
Livox Viewer, a WINDOWS
Up to nine Livox LiDAR sensor units can be connected to Livox Hub. Livox Hub has a Gigabit
Ethernet data interface and time synchronization is supported by GPS and IEEE 1588-2008
(PTPv2), which deliver sub-microsecond-level time synchronization of point cloud data.
Features
• LiDAR Management: With Livox Hub, users can monitor the working states and manage
the power supply of each LiDAR sensor. It can also integrate point cloud data and sends
commands to the LiDAR sensor.
• Time Synchronization: Time synchronization is supported by IEEE 1588-2008 (PTPv2) and
GPS, delivering sub-microsecond-level time synchronization of point cloud data.
• Two IP Modes: Connect with either static IP address or dynamic IP address, so that users can
connect Livox Hub directly to a computer.
• SDK: Offers a wide range of essential tools that help users develop unique applications and
algorithms.
Refer to the Livox Hub User Manual for more information about the features of Livox Hub.
2
® software, that allows users to view and record point cloud data.
TM -100