Konformitätserklärung; Declaration Of Conformity - HP Officejet Pro 8000 Benutzerhandbuch

Konformitätserklärung
Supplier's Name:
Supplier's Address:
declares, that the product
Product Name:
Regulatory Model Number:
Product Options:
conforms to the following Product Specifications and Regulations:
SAFETY:
EMC:
Supplementary Information:
1. This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the design. The Regulatory
Model Number is the main product identifier in the regulatory documentation and test reports, this number should not be
confused with the marketing name or the product numbers.
2. This product complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC
and carries the CE-marking accordingly. In addition, it complies with the WEEE Directive 2002/96/EC and RoHS Directive
2002/95/EC.
3. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
4. The product was tested in a typical configuration
Singapore
April 2008
Local contact for regulatory topics only:
EMEA: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany
USA : Hewlett-Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 650-857-1501

DECLARATION OF CONFORMITY

according to ISO/IEC 17050-1 and EN 17050-1
Hewlett-Packard Company
60, Alexandra Terrace, # 07-01 The Comtech, Singapore 118502
HP Officejet Pro 8000 Printer Series
1)
SNPRC-0702-01
C9101A / Automatic 2-Sided Printing Device
CB090A / 250-sheet Paper Tray
IEC 60950-1:2001 / EN60950-1:2001 + A11:2004
EN 60825-1 1994+A1:2002+A2: 2001
CISPR 22:2005/ EN 55022: 2006 Class B
EN 55024:1998 +A1:2001 + A2:2003
EN 61000-3-2: 2000 + A2: 2005
EN 61000-3-3:1995 +A1: 2001
(4)
FCC CFR 47, Part 15 Class B
(4)
(4)
/ ICES-003, Issue 4 Class B
Wong Soo Min, Director Quality
Imaging & Printing Manufacturing Operations
DoC#: SNPRC-0702-01-A
www.hp.com/go/certificates
Konformitätserklärung 133