Atag KF8178CDL Benutzerhandbuch Seite 25

Do a final check to make sure that:
• All screws are tightened.
• The sealing strip is attached tightly to the
cabinet.
Assembly instructions for the compensator lower part of the door
• The door opens and closes correctly.
With the door open, loosen the two screws situ-
ated in the lower part without unscrewing them
completely.
Position the steel compensator as indicated in
the figure and insert the upper part under the
head of the screws.
Align the compensator with the steel door panel
and tighten the screws.
Insert the steel carter inside the compensator as
indicated in the figure.
25