Rear Spacers; Door Reversibility - AEG S52900KSW0 Benutzerhandbuch

7.4 Rear spacers

7.5 Door reversibility

WARNING!
Before carrying out any opera-
tions, remove the plug from the
power socket.
F
Remove the clip-in plinth (D). Remove the
bottom hinge (E) by unscrewing the fixing
screws.
E
F
D
Remove the door from the pin (G). Unscrew
the pin (G) and screw it on the opposite
side.
Remove the cover from the top of the door
and position it on the opposite side.
Refit the door.
Fix the bottom hinge (E) on the opposite
side, using the screws previously removed.
G
Remove the cover (F) from the plinth (D) by
pushing it in the direction of the arrow and
install it on the opposite side.
Install the plinth (D), clipping it into place.
Inside the appliance you find two
spacers which must be fitted as shown
in the figure.
Slacken the screws and insert the spacer
under the screw head, then retighten the
screws.
To change the opening direction of the
door, do these steps:
ENGLISH
25