Cleaning And Maintenance; Technical Specifications - HQ Power VDPL2000STN Bedienungsanleitung

9.

Cleaning and Maintenance

Before starting any cleaning or maintenance activities:
1. Unplug the device's power cord from the mains.
2. Let the device cool down.
Cleaning

Clean the external optics and the housing with a slightly moist, soft cloth. Do not immerse the device
in any liquid.

Always be sure to dry all parts completely before plugging the unit back in.
Maintenance

All screws should be tightened and free of corrosion.

The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections.

Wipe the device regularly with a slightly moist, lint-free cloth. Do not use alcohol or solvents.

There are no user-serviceable parts.

Contact an authorized dealer for spare parts if necessary.
10.

Technical Specifications

power supply
power consumption
LEDs
colour temperature
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 01 – 06/05/2015
VDPL2000STN
110-250 V~, 50-60 Hz
120 W
264 x SMD 5050
7000 K
770 x 395 x 156 mm
3 kg
7 ©Velleman nv