Power On/Off; Video Recording - Wiseup CK6000 Benutzerhandbuch

3.1. POWER ON/OFF

3.1.1. Power on the camera by pressing Power On/Off Button for 2 seconds. The
camera will vibrate once. The blue and red indicator lights will illuminate for 3 sec-
onds. Then the blue indicator light will go out and the red one will stay illuminated,
indicating the camera has entered into standby mode.
3.1.2. Power off the camera by pressing Power On/Off Button for 2 seconds. The
camera will vibrate once and the indicator lights will go out.
3.1.3. The camera will shut down automatically if it is in standby mode without any
operation more than 3 minutes.
[Note]:
1). If no micro SD card is fitted into the camera, the blue and red indicator lights will keep flashing for
10 seconds, then the camera will shut down automatically.
2). If the battery is low, the blue indicator light will flash fast and then the camera will shut down auto-
matically.

3.2. VIDEO RECORDING

3.2.1. Power on the camera by pressing Power On/Off Button for 2 seconds. The
camera will vibrate once. The blue and red indicator lights will illuminate for 3 sec-
onds. Then the blue indicator light will go out and the red one will stay illuminated,
indicating the camera has entered into standby mode.
3.2.2. Press Power On/Off Button once to record video. The camera will vibrate once
and the red indicator light will keep flashing slowly.
3.2.3. Press Power On/Off Button once again to stop video recording. The camera
will vibrate once. The red indicator light will stay illuminated, indicating the camera is
back to standby mode.
[Note]:
1). A video file will be generated and saved every 5 minutes automatically.
2). The camera can record video continuously for 1 hour on a full charge.
3). Video Resolution: 1920×1080P Video Format: AVI
3.3. CAMERA/STILL PHOTOGRAPHY
3.3.1. Power on the camera by pressing Power On/Off Button for 2 seconds. The
camera will vibrate once. The blue and red indicator lights will illuminate for 3 sec-
onds. Then the blue indicator light will go out and the red one will stay illuminated,
indicating the camera has entered into standby mode.
3.3.2. Press Mode Button once to enter into photograph mode. The camera will