Specifications - Medel MYO TENS Handbuch

SPECIFICATIONS

• Power sources: 3.0V DC, 2xAAA batteries
• Frequency: 2Hz~150Hz
• Pulse width: 50μs~300μs
• Output voltage: 0~45V (at 500 ohm load)
• Output intensity level: 0~25 levels
• Treatment time: about 30 minutes
• Operating Conditions: 5°C~40°C;
30%RH~75%RH ;700hPa-1060hPa
• Storage and Transportation Conditions:
-10°C~55°C; 10%RH~90%RH; 700 hPa – 1060 hPa
• Size: 115mm x 53mm x 25mm
• Weight: about 80g (without batteries)
• Service life of the device: 3 years
• Service life of the barrery: whit new super heavy duty batteries,
approx, two weeks when used for 30 min/ day in Arm program at
13 level intensity.
PROTECT THE ENVIRONEMENT
Used batteries should be placed in the appropriate col-
lection bin so they can be recycled. Do not mix different
types of batteries, or use new and old batteries at the
same time. At the end of its serviceable life, this product
must be disposed of at a recycling centre for electrical
and electronic equipment.
100275_MYO-TENS_USER MANUAL_REV.00.indd 41
WARRANTY TERM AND CONDITIONS
•The device is guaranteed for 2 years from the date of purchase
against any defects originating in materials or workmanship.
•The warranty consists of free replacement of defective compo-
nents at the origin.
• The warranty does not cover accessories supplied and parts
subject to normal wear and tear.
•The shipping costs of the appliance are borne by the user.
•The warranty shall lapse if the appliance has been tampered
with, if the defect is caused by improper use or if the damage is
not attributable to the manufacturer (accidental fall, improper
transport, etc.).
•The warranty does not imply any compensation for damages,
either direct or indirect, of any kind, to people or property during
the period in which the product cannot be used.
•The warranty is valid from the date of purchase of the product
certified by the receipt or the purchase invoice.
Assistance
41
EN
08/08/2019 15:15:02