Inserting Batteries - Medel MYO TENS Handbuch

EN

INSERTING BATTERIES

1. Remove the battery cover on the back of the device as
shown by the graphic to the right.
2. Insert 2xAAA batteries. Make sure the positive + and negative – signs
correspond with the markings in the device when inserting batteries.
Reinstall the battery cover as shown by the graphic to the right.
Notes:
• Please use 2×AAA batteries in this unit.
• Remove the batteries if the device is not in use for long
periods of time.
• Do not mix old and new batteries or different types of
batteries.
• Warning: If batteries leak and come into contact with the
skin or eyes, wash immediately with large amounts of
water.
• Batteries must be handled by an adult. Keep batteries out
of the reach of children.
• Remove exhausted batteries from the unit.
• Dispose the used batteries safely according to local
regulations.
33
100275_MYO-TENS_USER MANUAL_REV.00.indd 33 08/08/2019 15:14:55