Operation - Medel MYO TENS Handbuch

EN

OPERATION

STEP 1
Out the electrodes of the plastic bag.
Connect the electrodes to their cable with snap buttons.
STEP 2
Insert the ends of the cables into the output
on the top of the device Sockets.
PS: You can use two pairs of electrodes or well use only one.
STEP 3
Pad placement
Take the pads out of the sealed package.
Remove the clear plastic film from the back of the pads.
1 2
Place pads on clean, dry and healthy skin, near or
surrounding the area with pain at least 2 inches apart,
and do not let them touch. Make sure there is a linear
path between the two pads.
3
34
100275_MYO-TENS_USER MANUAL_REV.00.indd 34 08/08/2019 15:14:59