Denon DN-S3500 Bedienungsanleitung Seite 17

CLR B TR M
T T T
Exit and Reloop
u The EXIT/RELOOP button
6
can be used same as
Seamless Loop function.
Reverse Play
i You can play the Sampled
sound in reverse by pushing
the REV button. In reve se
play mode REV LED lights
up and the platter spins
7
backwards.
• Reverse playback will take affect when
you push the SAMP button after reverse
mode has been turned on. To return to
normal forwa d playback, push the REV
button once again.
Moving Sampler B point
o When the B button is
pushed during Sampler
8
playback, the B point
moves to the point at which
the button was pushed, and
loop playback from point A starts.
Clearing the Sampler data
!0 During the Sampler stop mode, press the
REV/(CLR) button, while pushing the SAMP
button to clear the Sampler.
CLR
9
SAMP
REV
• Or, by pushing the REV/(CLR) button for
more than. 1 sec, you can clear Sampler.
11
ENGLISH
Adjust pitch
The Sampler playback pitch can be adjusted.
!1 Push the PITCH/VOL. button, the pitch input mode
is set, PARAMETERS LED flashes and the current
settings are displayed on the character display.
• Start Sampler playback.
!2 Turning the PARAMETERS knob can change the
pitch.
✽ When pushing down and turning the PARAMETERS
knob, you can change the pitch range 10 times
faster.
Adjust sound level
The Sampler playback sound level can be adjusted.
!3 Push the PITCH/VOL. button again when the pitch
input mode, the sound level input mode is set,
PARAMETERS LED flashes and the current
settings are displayed on the character display.
EX T/
RELOOP
• Start Sampler playback.
!4 Turning the PARAMETERS knob can change the
output sound level.
!5 Push the PITCH/VOL. button again to turn the
sound level input mode off.
CLR
REV
B
ENGLISH