Typical installation diagram
Water pump
Dimensions
Pipe Connection
The following barrel unions are provided for connecting to the piping from the pool (the
pumps are designed to accept European PVC pipe):
DSF200CE – 50mm
DSF300CE – 50 & 63mm
DSF420CE – 63mm
The use of any pipe smaller than those specified above is not recommended. Suction
piping should be free from all air leaks and any humps and hollows which cause suction
difficulties. The discharge piping from the pump outlet should be connected to the inlet
connection on the swimming pool filter (usually at the filter control valve).
Barrel unions need to be hand tightened. No sealant, glues or silicones
are required.
Sand filter
5
Vacuum hose
Vacuum head