Mitsubishi Electric PAC-YT34STA Anweisungshandbuch Seite 25

2. Selecting the group No.
(1) Call the Group No.
• Call the group No. in which the interlocked unit is to be registered.
Use the same operations as section 7-1-1. (1) Select the group.
• Select the group with the GROUP
(2) When the group is selected, the corresponding group No. will appear at the group No. display
section.
(3) After the group is selected, if there are registered units, the registered unit with the smallest
address No. will appear.
Set temperature display section ... Address No.
Displayed details
Group No. display section ... Address No. attributes
Example
) When group 1 is not registered, and the address 003 indoor unit is registered in group 2.
Interlocked Unit Setting Screen (group 1)
Press
Interlocked Unit Setting Screen (group 2)
3. Calling the registration unit
Call the address No. of the indoor unit to be interlocked with a registered interlocked unit by
pressing the switch.
ON/OFF
4. Selecting the interlocked unit's address No.
Set the address No. of the interlocked unit to be registered with the indoor unit selected in step 3.
• After selecting the indoor unit with step 3, press the TIME
• The address No. of the interlocked unit will change in the following order each time the switch is
pressed. (The numbers will change in 10-unit increments when the switch is held down.)
• The address numbers will appear in reverse order when the
Pattern No. display section: "--" is displayed.
switch once.
01 02
Pattern No. display section:
The attributes will disappear when the switches is pressed.
and switches.
Operation No. display section:
A unit is not registered in group 1, so "---" is displayed.
switch.
50
Operation No. display section:
Set to the address No. of the interlocked unit to be
registered.
switch is pressed.
25