Deleting An Operation Setting; Copying The Details Of A Pattern Setting; Weekly Program Setting Screen - Mitsubishi Electric PAC-YT34STA Anweisungshandbuch

2. Set the item to be prohibited. (The item can be set by simultaneously pressing the switch for the item to be
set while " " flickers.)
To prohibit ON/OFF
To prohibit operation mode changeover : Press the
To prohibit room temperature adjustment : Press the
3. Input the details of the prohibit setting.
After step 2, light up the items to be prohibited, and then press the
The switch will change from flicker to ON, and the set details will be input.
PROHIBIT
(5) Input the operation details.
Press the
OPERATION
The operation details will be input and the operation No. will be incremented by one.

4-4-3. Deleting an operation setting

(1) Select the operation No. to be deleted.
Refer to section 4-4-1 (2) and (3) for the selection methods.
(2) Delete the settings.
Press the
CLEAR
The displayed operation setting details will be deleted. (The default state will be set.)

4-4-4. Copying the details of a pattern setting

• All of the operation details of a set pattern can be copied into another pattern.
(Example: The details set for pattern 1 can be copied to pattern 2. In this case, the contents of
pattern 2 will be overwritten.)
(1) Select the pattern number to be copied, and display in the display section.
(2) Hold down the
DAY PATTERN
pattern will be saved.
(The operation time and details display sections will flicker.)
(3) Select the copy destination pattern No., and display in the display section.
(4) Hold down the
DAY
be copied to the copy destination.
(The operation time and details display sections will light.)
To cancel copying of the pattern, hold down the
after step (1) or (3).)
(The operation time and details display sections will turn ON. If the operation is cancelled after
step (3), the pattern No. will return to the copy origin No.)

4-5. WEEKLY PROGRAM SETTING screen

• Set the schedule pattern, set in section 4-3, for each day in each group.
• All of the set schedules are deleted.
14
: Press the
display will change.
ADJUSTMENT display will change.
switch.
switch twice in succession.
switch for two or more seconds. The details set for the copy origin
switch for two or more seconds. The setting details saved in step (2) will
switch. The ON/OFF display will change.
ON/OFF
switch. The OPERATION CHANGEOVER
MODE
switch. The ROOM TEMPERATURE
TEMP.
PROHIBIT
switch for two or more seconds
DAY PATTERN
The weekly pattern for the currently selected
group will flicker.
The currently selected group No. is lit and
displayed.
switch.