Avigilon DOME-OD-BASE Installationsanleitung Seite 3

NOTE: Only vandal resistant conduits should be used to
When installing the dome camera outdoors, ensure the
conduit and its fitting are designed for outdoor use. They
must have a suitable IP rating for the environment that the
dome camera is installed.
3. Use the drill template to drill four mounting holes in the
ceiling or wall.
When installing outdoors on a vertical surface, the cable
entry hole must face downwards.
4. Mount the base on the ceiling/wall using the supplied
screws and anchors. Use the supplied rubber washers to
create a water tight seal between the screws and the
base.
2
protect the cables, and be compatible with the dome
camera's vandal resistant design.
Mounting Screw
Rubber Sealing Washer
Concrete Anchor