Yamaha XM-CS-700 Betriebsanleitung Seite 6

English
•
Before moving this unit, be sure to disconnect all
connection cables. Failure to observe this may damage
the cables or cause you or someone else to trip and
fall.
Maintenance
•
Remove the power plug from the AC outlet before
cleaning the unit. Failure to observe this may cause
electric shocks.
Handling caution
•
Do not insert foreign materials such as metal or paper
into the ventilation holes of this unit. Failure to
observe this may cause a fire, electric shocks, or
malfunctions. If foreign material gets into the unit,
immediately pull the power plug from the AC outlet
and request an inspection from the dealer where you
purchased the unit or from qualified Yamaha service
personnel.
•
Keep small parts out of the reach of infants. Your
children may accidentally swallow them.
•
Do not do the following:
- Stand on or sit on the equipment.
- Put heavy items on top of the equipment.
- Place the equipment in a stack.
- Apply unreasonable force to buttons, switches,
input/output terminals, etc.
• Avoid pulling the connected cables to prevent injuries or
damage to the unit by causing it to fall.
• Do not operate the unit if the sound is distorting.
Prolonged use in this condition could cause overheating
and result in fire.
NOTICE
Indicates points that you must observe in order to prevent
product failure, damage or malfunction and data loss, as
well as to protect the environment.
Installation
• Do not use this unit in the vicinity of other electronic
equipment. Failure to observe this may cause this unit or
the other equipment to produce noise.
• Do not use this unit in a location that is exposed to direct
sunlight, that becomes extremely hot, such as near a
heater, or extremely cold, or that is subject to excessive
dust or vibration. Failure to observe this may cause the
unit's panel to become deformed, the internal
components to malfunction, or for operation to become
unstable.
Handling
•
Do not place vinyl, plastic, or rubber products on this
unit. Failure to observe this may cause discoloration or
deformation in the panel of this unit.
•
If the ambient temperature changes drastically (such
as during unit transportation or under rapid heating or
cooling) and there is a chance condensation may have
formed in the unit, leave the unit for several hours
without turning on the power until it is completely dry
before use. Using the unit while there is condensation
can cause malfunctions.
Maintenance
•
If the temperature or humidity changes drastically,
water droplets (condensation) may form on the unit
surface. If water droplets form, immediately wipe
them off with a soft cloth.
•
When cleaning the unit, use a dry, soft cloth. Using
chemicals such as benzine or thinner, cleaning agents,
or chemical scrubbing cloths can cause discoloration
or deformation.
INFORMATION
Indicates information of note regarding this product.
Do not connect the product to any item of equipment other
than the Yamaha CS-700. Failure to observe this could
result in fire, electric shock, or damage to the product.
About content in this manual
•
The company names and product names in this manual
are the trademarks or registered trademarks of their
respective companies.
4