Deactivate The Alarm Function; Snooze Function; Automatic Switch Off (Sleep Function) - Silvercrest HG00708A Bedienungs- Und Sicherheitshinweise

Deactivate the alarm function

Press the DOWN / AL1 button or the UP / AL2 button repeat-
12 13
edly until the dot beside the alarm type ( = Alarm, = Radio)
goes away.

Snooze function

To switch off the alarm temporarily, press the SNOOZE / LIGHT /
DIM button while the alarm is ringing. The alarm will be reacti-
10
vated after approx. 6 mins.
When alarm is temporarily turned off, the LED blinks on the display.

Automatic switch off (SLEEP function)

Note: Using the SLEEP function, the device switches itself off accord-
ing to a time set by you between 60 and 10 minutes.
To switch on the device, press the SLEEP button . On the display
8
a switch-off time of 60 minutes appears. To shorten the switch-off
1
time by a further 10 minutes, press the SLEEP button again.
8
Press the SLEEP button repeatedly until the desired switch-off
8
time is shown on the display . After a few seconds the time will
1
show up on the display again.
1
To switch off the SLEEP function, press the SLEEP button repeat-
8
edly until OFF shows up on the display . Alternatively press the
1
/ FM / AM button ; the device will also switch off.
11
Note: When sleep function is activated, the frequency band cannot
be changed between AM and FM.
20 GB/IE