Setting The Nap Timer; Setting The Alarm Function - Silvercrest SIUR 10 A1 Bedienungsanleitung

Setting the NAP timer

The device is provided with a separate timer function with an adjustable alarm
time of 1 - 120 minutes.
Precondition: The device is in clock/standby operating mode.
♦ Touch the NAP control point
on the remote control. NAP will appear on the display
display blinks.
♦ Press the i /i
keys
after whose expiry the alarm will sound.
♦ Confi rm the setting by touching the Set|OK control point
or press the Set OK key
after whose expiry a louder tone will be sounded is now shown beneath
the time display.
♦ You can turn the alarm off by touching any control point or pressing any key.
♦ In order to turn the NAP time off early, press and hold the NAP control
point

Setting the alarm function

The device off ers you an alarm function with 2 separately adjustable parameters.
Precondition: The device is in the clock/standby operating mode.
♦ Touch the AL1
or AL2 key
The alarm display will be shown, and the weekday abbreviation will blink
in the display
i /i
group of days for the alarm:
MO
TU
WE
TH
FR
SA
SU
WEEK 1 - 7 = every weekday
WEEK 1 - 5 = Monday to Friday
WEEK 6 - 7 = Saturday and Sunday
♦ Next, touch the
remote control. The alarm time hour display will now blink.
SIUR 10 A1
control points
/ on the remote control to set the required number of minutes
on the remote control. The number of minutes
on the device until the date display is shown again.
or AL2 control point on the device, or press the AL1
on the remote control to call up the settings for Alarm 1 or 2.
. Use the i /i
keys / on the remote control to select the required weekday or
= Monday
= Tuesday
= Wednesday
= Thursday
= Friday
= Saturday
= Sunday
control point
on the device or press the i
/ on the device or press then i /i
control points /
or press the i
key
, and the minute
on the device
on the device or the
key on the
19
GB
IE