Activate The Alarm Function; Deactivate The Alarm - Silvercrest HG00708A Bedienungs- Und Sicherheitshinweise

Press the DOWN / AL1 button
display the time will flash and a dot will appear in the left or
1
right corner beside the type of "alarm" (
To set the hour, press or hold the VOL - / HR -button
To set the minutes, press or hold the VOL + / MIN -button
Press the DOWN / AL1 button
"radio" ( ) as the alarm. On the display
left or right corner beside the alarm „radio" ( ). The time and the
dot are now blinking.
To apply a setting, wait until the time and the dot beside the alarm
type stop flashing.
Note: If you would prefer the „radio" to be your alarm, the last
programmed radio station and volume will be broadcast.

Activate the alarm function

To activate the alarm function, press the DOWN / AL1 button
UP / AL2 button
13
display next to the alarm (1 or 2) symbolizing the waking up function
with alarm ( ) or with the radio ( ).

Deactivate the alarm

To switch off the alarm for 24 hours, press the
while the alarm is ringing.
11
Note: The device automatically stops the alarm after an hour if the
alarm has not been switched off manually.
12
12
briefly one or more times. A dot appears on the
or UP / AL2 button
).
or UP / AL2 button
a dot appears in the
1
/ FM / AM button
. On the
13
.
5
.
6
to set the
13
or
12
GB/IE 19