Symbols Description - PICO PicoScope 2000-Serie Kurzanleitung

Quick Start Guide
1 Introduction
Thank you for purchasing a Pico Technology PC Oscilloscope. This guide
explains how to install the PicoScope software, connect your oscilloscope, and
access manuals on the disk supplied.
Once you have finished the basic installation, refer to the PicoScope 6 User's Guide
and PicoScope 2000 Series Data Sheet for further information about setting up and
using your oscilloscope.
2 Safety information
To prevent possible electrical shock, fire, personal injury, or damage to the product,
read this safety information carefully before attempting to install or use the product.
In addition, follow all generally accepted safety practices and procedures for working
with and near electricity.
The product has been designed and tested in accordance with the European standard
publication EN 61010-1:2010, and left the factory in a safe condition. The following
safety descriptions are found throughout this guide:
A WARNING identifies conditions or practices that could result in injury or death.
A CAUTION identifies conditions or practices that could result in damage to the
product or equipment to which it is connected.
Symbols
These safety and electrical symbols may appear on the product or in this guide.
Symbols Description
Possibility of electric
shock
Caution
Chassis terminal
Do not dispose
of this product as
unsorted municipal
waste.
DO231-5 Copyright © 2006–2016 Pico Technology Ltd. All rights reserved.
PicoScope 2000 Series Oscilloscopes and MSOs
Appearance on the product indicates a need to
read this Safety and operation instruction.
EN
1