Set The Humidity Level - Philips AC4084 Benutzerhandbuch

Situations You will see
One of the SPEED lights
Choose a fan
speed manually (
TIMER lights ( , , or )
(see 'Manual').
are on.
The appliance The AUTO light is on.
One of the SPEED lights
is in auto mode
(see 'Auto'). (SILENT,
of the TIMER lights ( , , or
) are on.
The appliance is The SILENT light and one
of the TIMER lights ( , , or
in silent mode
(see 'Silent ) are on.
mode').
1
Press the TIMER button to activate the
timer.
» The TIMER light ( , , or ) goes on.
2
Press the TIMER button repeatedly to
choose the number of hours you want the
appliance to operate. The corresponding
TIMER light goes on.
To deactivate the timer function, press the
TIMER button repeatedly until the TIMER light
( , , or ) is out.

Set the humidity level

Note
•
Make sure that the water bucket is filled with
water when you want to use the humidification
function (see the chapter 'Get started', section
'Prepare for humidification').
or ) and one of the
or ), and one
You can set the desired humidity level only in
AUTO mode. When the humidity of the room
reaches the desired level, the humidity stays at
this level constantly.
Press the HUMIDITY SET button once or
•
more times to set the desired air humidity
to 40%, 50% or 60%.
» The corresponding HUMIDITY SET
light (40%, 50% or 60%) goes on.
Note
•
If you do not set the humidity level, the
HUMIDITY SET light goes off. The humidifier
humidifies the air under AUTO mode and the
preset humidity level is 50%.
•
If you change the fan speed (SILENT,
the humidifier automatically operates according
to the fan speed level and the AUTO mode
deactivates.
•
If you want to increase the humidity level in
shorter time, you can select higher fan speed.
•
The appliance comes with a smart memory
function, it can memorize the settings when
the appliance is switched off (e.g. electricity
shortage). When the appliance is plugged in/
switched on again, it automatically starts at the
previous setting.
or ),
EN 15