Set The Child Lock - Philips 1000 Serie Benutzerhandbuch

Auto activating the night
sensing mode
When the air purifier operates in auto
mode or allergen mode, if the light
sensor detects the lights in your room
are turned off, the air purifier goes to
the night sensing mode automatically.
The air purifier will adjust the fan speed
in real-time to make sure the air in your
room is clean. The air quality light will
be dimmed.
Note
• The light sensor detects the lights in
your room after 11 hours in the night
sensing mode.
• If the lights in your room are turned
on, the air purifier will quit the night
sensing mode and operate under the
previous mode. The air quality light
and the display will be on again.
• To exit the night sensing mode
or
manually, touch
EN
8

Set the child lock

1
2
• The child lock function is automatically
button.
Touch and hold the child lock
button for 3 seconds to activate
child lock (Fig.p).
» The child lock icon
on the screen.
» When the child lock is on,
all the other buttons are not
responsive, only the child lock
icon blinks.
Touch and hold the child lock
button for 3 seconds again to
deactivate child lock (Fig.q).
» The child lock icon
disappears.
Note
unlocked when the pre-filter cleaning
code or the filter replacement code
displays on the screen.
displays