Celestron NexGuide Bedienungsanleitung Seite 7

GETTING STARTED
n m
avigaTing The enus
Press the MENU button to activate the main menu tree. Use the UP/DOWN buttons to scroll between the menu items.
Press the ENTER or RIGHT to choose between the following submenus:
• ZM STAR or ZM CTR Menu—These two menus zoom in on the image, and are only usable when NexGuide is in
preview mode. Using the UP/DOWN buttons, choose between the zoom level 1 (the entire image), 2 (384x384 pixels
of the image sensor), 3 (128x128 pixels of the image sensor) and 4 (64x64 pixels of the image sensor). After choosing
the level, press ENTER to confirm or ESC to keep the previous zoom level. ZM STAR tries to use the position of the
brightest star in the NexGuide's field of view as the center of the zoomed image, unless the star is too close to the
edge of the image sensor. ZM CTR always zooms at the center of the image sensor.
• Lock Menu—This submenu locks (or re-locks) a star in NexGuide's field of view for later guiding operation. After
entering this submenu, use the UP/DOWN buttons to choose from the following options and then press ENTER
or LEFT button to confirm. The current mode is displayed in the upper left corner of the LCD.
• Auto: NexGuide will try to automatically lock onto the brightest star in the FOV.
• Manual/Re-Lock: NexGuide will show a small pick-up crosshair in the image area of the LCD display. Use the
four direction buttons to move the crosshair onto or near a star. Press ENTER to lock NexGuide on the star.
• Unlock: NexGuide will exit from the locked guiding mode and return to preview mode.
6