Celestron NexGuide Bedienungsanleitung Seite 15

OPERATING UNDER THE NIGHT SKY
The following diagram is what you will see in the GUIDING mode.
Exposure time
Brightness of the star
R.A. and Dec. guiding
agressiveness in mS/Pixel
The drift in R.A. and Dec. in pixels
Indication that the SynGuider is
sending RA+/RA- or Dec+/Dec-
signals via the autoguider port.
Operations
The guiding aggressiveness of the RA or Dec axis can be increased or decreased with the direction buttons. Use the
RIGHT/LEFT buttons to adjust the RA aggressiveness and the UP/DOWN buttons to adjust the Dec aggressiveness.
If the NexGuide loses the guide star during autoguiding it will prompt "STAR LOST. " Press ESC to return to Preview
Mode and begin the auto calibration routine again.
To avoid creating any vibration that may interfere with guiding, place the control pad on a solid surface (such as your
accessory tray) so that it does not hang directly from NexGuide.
Suspend Autoguiding
The exposure on your astroimaging camera should be stopped before suspending autoguiding. Use the Guide/Stop
Menu to stop autoguiding.
GUIDING
EXP 300
BRI 25
GR 220
DG 180
DR -0.39
DD 0.25
RA+ Dec-
A crosshair is
displayed for you to
monitor the effects
of autoguiding. The
center of the cross
is the position of
the guide star when
guiding is activated.
14