Celestron NexGuide Bedienungsanleitung Seite 5

GETTING STARTED
a n g
TTaching ex uide To a
There are two ways to install NexGuide:
• Option 1: Use an M42 thread adapter to thread NexGuide directly onto the
guide scope. This installation method provides the most secure connection and
is best suited for guide scopes equipped with a finderscope or a red dot finder.
• Option 2: Attach the M42-to-1.25 adapter to NexGuide, then insert and lock it
into the 1.25-inch eyepiece holder on the guide scope. This method is suitable
for those using a par-focal eyepiece to search for a guide star. When the star
has been located, simply exchange the eyepiece for NexGuide.
c c
onnecTing ables
1. Plug the hand control into the connector labeled "Hand Control" on NexGuide.
2. Plug one end of the guiding cable into the port labeled "Auto Guider" and the other end into the guiding port
on your mount.
3. Plug the battery pack or power supply into NexGuide's power outlet.
r lcd d
eading The isPlay
The LCD screen is divided into two zones. The left half displays text information, such as the menu, data, and status
of the device. The right half of the screen displays the image captured by the optical sensor.
g s
uide coPe
4