Unpacking The Printer - QuickLabel QL-800 Kurzanleitung

QL-800 Quick Start Guide
Use the instructions in this guide to quickly set up your new QL-800 printer. For detailed
information about printer operation, please refer to the QL-800 User Guide.
After installing the printer driver, you can access the QL-800 User Guide by choosing Start >
All Programs > QuickLabel QL-800 > User Guide.

Unpacking the Printer

1. Remove the accessory box and packing materials from the shipping carton.
2. With help from another person, lift the printer out of the shipping carton.
The printer is heavy and moving it requires two people. One person should lift the
front by the indicated lift point, while the other person should lift the back by the
indicated lift point. Do not lift the printer by the mandrel. Lift the front of the printer by
the recessed handle. Lift the rear of the printer by the flat area of the purple frame
above the mandrel. Keep the printer level while lifting it.
3. Place the printer on a sturdy, flat horizontal surface that can support at least 100 pounds
(45.4 kilograms).
4. Remove all packing tape from the printer exterior. This tape is used to secure the doors and
covers in place.
There is also tape holding the maintenance cartridge in place. Open the main side door and
lower side door to access and remove this tape.
QL-800 Quick Start Guide 1