QuickLabel QL-800 Kurzanleitung Seite 13

10. The printer will beep three times to indicate the media has been detected. Release the
media when the printer starts automatically feeding it into the printer. The printer will feed
media and the loading process will be complete.
Note: If the automatic media feeding process fails, the media will be ejected back out of the
printer. If you experience multiple loading failures, use the alternate manual feed method
described in the QL-800 User Guide.
Next Steps
You have finished setting up the printer. Please refer to the QL-800 User Guide to set up the
printer driver, configure optional QuickLabel software, and begin printing labels.
Visit www.QuickLabel.com for video tutorials on setting up and using the QL-800 printer.
QL-800 Quick Start Guide 11