Operating Instructions; Remote Controller (Fig. 8) - Beko EFS8000W Bedienungsanleitung

5

Operating instructions

Plug in the power adapter, after a "beep" tone, the fan is on standby.

5.1 Remote controller (Fig. 8)

1. Pro/timer
2. Mode
3. OSC
4. Drive plate
" " On/Off key
Press this button under standby mode, the fan starts at memorial speed which it worked last time.
Press this button when the fan is working, it will be turned off to standby state.
" " Drive plate
When you rotate the drive plate clockwise, the speed increases from the following manner: normal
wind 01......When you rotate the drive plate counter-clockwise, the speed decreases from the following
manner: normal wind 12......
" " Mode key
Repeat press this button, the wind will be switched in order of "normal wind - natural wind - sleep
wind - comfort - silence - normal wind - ... ".
Normal wind: The wind speed is constant set by the wind level, when the "normal wind" icon " " is lit,
01 - 12 levels are normal wind.
Natural wind: Fan will simulate natural wind according to pre-programmed manner, the wind speed
changes in accordance with the program, which makes people feeling idle, naturally and it likes to be in
the nature.
Sleep wind: The wind weakens step by step during the preset time until stop. And then the fan
switches automatically off so that man can drop asleep.
Comfortable wind: The speed will be changed with the room temperature intelligently.
Stand Fan / User Manual
Fig. 8
5
4
1
3
2
Fig. 9
6 7 8
5. On/Off
6. Remote controller
7. Battery
8. Battery cover
9 / 16 EN