Werbung
6
Windows installation when using a USB cable: The software installation
EN
files are in the product memory. The HP Smart Install program uses a USB
cable to transfer the installation files from the product to your computer. It
installs all files you need to print, copy, and scan. If you prefer not to use
the HP Smart Install program, you can insert the product CD to install the
software.
The HP Smart Install program might take a few minutes to start.
NOTE: If the installation program does not start automatically, the AutoPlay feature
might be disabled on the computer. In Windows Explorer, browse the computer,
and then double-click the HP Smart Install drive to run the installation program.
NOTE: If the HP Smart Install program fails, disconnect the USB cable, turn the
product off and then on again, and then insert the product CD into your computer.
Follow the onscreen instructions. Connect the cable only when the software
prompts you.
Windows installation for networked printers (wired or wireless):
NOTE: If you are using a wired network, connect the network cable before inserting
the CD.
Insert the CD into the computer and follow the instructions. Your
installation
is complete.
1. To use the HP Smart Install program, connect an A-to-B type
USB cable to the computer and the product.
2. Follow the onscreen instructions.
20
Werbung
