Axis Q60 Serie Installationsanleitung Seite 9

AXIS Q6032-C/Q6034-C/Q6035-C Installation Guide
Connectors
Camera
SD card slot - A standard or high capacity SD card (not included) can be used for local recording
with removable storage.
To insert and remove the SD card, the dome cover must be removed, see Install an SD Card (not
included), on page 14.
To prevent corruption of recordings, the SD card should be unmounted before it is ejected.
To unmount, go to Setup > System Options > Storage > SD Card and click Unmount.
Multi-connector - Terminal connector for connecting the supplied media converter switch.
The supplied multi-connector cable is required in order to maintain the product's IP rating.
Media Converter Switch
Power connector (DC input) - 2-pin terminal block for power input.
Function
DC input GND
12 V DC
Power connector (DC output) - Two 2-pin terminal blocks for power
output (pin 4 is not used).
Function
DC output 12 V DC
GND
N/a
Network connector RJ-45 (external) - Two RJ-45 connectors (10/100Base-T) for network
connectivity.
Pin Notes
1 Ground
2 Power in from power supply (sold
separately)
Pin Notes
1-2 Power out to camera
3 Ground
4 N/a
Page 9
1
- +
Specifications
Max load = 7 A
12 - 13.2 V DC, min 75 W
1 2 3
+ + -
Specifications
Max load = 6.5 A
12 - 13.2 V DC, min 70 W
2
4