Axis Q60 Serie Installationsanleitung Seite 14

Page 14
8. Put the dome ring with the dome cover back in the original position and tighten the screws
(torque 4 Nm). Make sure to align the bulge on the dome cover with the cooling system on the
camera unit.
Install an SD Card (not included)
Installing a standard or high capacity SD card (not included), which can be used for local recording
with removable storage, is optional.
1. Loosen the dome ring screws and remove the dome ring and dome cover, see illustration on
page 6.
2. Insert an SD card (not included) into the SDHC (Secure Digital High Capacity) card slot.
3. Put the dome cover back in the original position and tighten the screws (torque 4 Nm). Make
sure to align the bulge on the dome cover with the cooling system on the camera unit, see
illustration on page 14.
To prevent corruption of recordings, the SD card should be unmounted before it is ejected. To
unmount, go to Setup > System Options > Storage > SD Card and click Unmount.
AXIS Q6032-C/Q6034-C/Q6035-C Installation Guide
Dome cover
Cooling system