Réglage De L'heure; Réglage De La Date - Zodiac STP1-11 Bedienungsanleitung

Care and Precautions
Each Zodiac timepiece is designed and manufactured to exceed the highest of
standards . Unlike most other mechanical objects, a watch operates non-stop .
In order to ensure optimal performance and longevity from your timepiece,
please review the simple guidelines for care and precautions of your new
Zodiac timepiece .
Care
Your timepiece should be cleaned with a soft cloth and water only . Do not
submerge your timepiece . Your timepiece should be rinsed clean and dried
with a soft cloth after any saltwater use . In order to maintain the "new look"
of metal bracelets, we recommend periodic cleanings of the bracelet . Dip a
soft brush in warm soapy water and gently rub bracelet clean . We advise
having your timepiece serviced every 18-24 months to ensure long use and
trouble free operation .
Precautions
Your timepiece is a complex integration of parts and components brought
together by skilled craftsmen . There are certain actions or environmental
situations that may damage or impede your timepiece's ability to perform
optimally .
It is important to avoid the following conditions: extreme heat or cold, as
well as prolonged periods of exposure to direct sunlight, exposure to wet
conditions that exceed your timepiece's water rating (see case back and
chart) . Never operate any of the function buttons or crown when timepiece is
in contact with water .
Your timepiece should not be affected by magnetic fields generated by
household items such as televisions and stereos, but avoidance of other
strong electric fields or static electricity, which may interrupt mechanism, is
suggested . It is also important to avoid extreme shock or impact .
10
3 aiguilles avec date
(Modèle 715) (STP3-13, STP1-11 automatique)
Réglage de l'heure
1 . Dévisser (si nécessaire) et retirer la couronne pour la mettre en position I .
2 . Retirer la couronne pour la mettre en position III (la montre s'arrête) .
3 . Tourner la couronne jusqu'à atteindre l'heure voulue .
4 . Appuyer sur la couronne pour la ramener en position I et revisser (si
nécessaire) .
Réglage de la date
1 . Tirer le remontoir et le mettre en position II (la montre continue
de fonctionner) .
2 . Tourner le remontoir jusqu'à ce que la date de la veille apparaisse .
3 . Tirer le remontoir et le mettre en position III (la montre s'arrête) .
4 . Tourner le remontoir jusqu'à ce que la bonne date apparaisse .
5 . Continuer de tourner le remontoir jusqu'à ce que la bonne
heure apparaisse .
6 . Remettre le remontoir en position I .
Ne pas changer la date entre 22 heures et 2 heures. C'est la période durant
laquelle le mouvement est en position pour effectuer le changement de date
automatique, et toute interférence pourrait endommager le mouvement.
11