Display - BEARWARE 302688/20171207FZ006 Bedienungsanleitung

If the attempt to receive a signal fails, then the weather station stops scanning. The
DCF symbol disappears from the display.
You can re-activate the scanning by pressing the "+" and "-" buttons simultaneously
for about 3 seconds until the DCF symbol is shown once again on the display. You
can cancel the manual scanning by pressing the "-" button for about 2 seconds
during scanning.
Alternatively, you have the option of manually setting the time. Further informati-
on on this topic can be found in the "Basic settings" section.

7. Display

Time display:
Date and day:
22
The time can be displayed in a 12-hour
or 24-hour format.
The weather station has a date and
day display. The date is displayed in the
lower section and the day in the upper
section. The pre-configured language is
German. If you want to change the lan-
guage, please refer to the section "Basic
settings" for more information.
English