Nevadent NZR 1.5 B1 Bedienungsanleitung Seite 11

5) Once the interdental space appears sufficiently clean,
release the operating button
6) Pull the cleaning attachment
and continue cleaning with the next interdental space.
NOTE
► Divide your jaw into 4 quadrants. Once you have
cleaned all the interdental spaces in one quadrant, rinse
the cleaning attachment
7) After completing the cleaning session, rinse the cleaning
attachment
appliance so that the cleaning attachment
downwards and the water flows over the cleaning attach-
ment.
If you want to remove and dispose of the cleaning attachment
1) Remove the appliance head
point on the appliance head
symbol on the hand set
appliance head
2) Pull the cleaning attachment
If it is attached too firmly, use the removal tool on the storage
box
3) To do this, push the cleaning attachment
through the opening in the storage box
hand set
direction of the arrow:
This will remove the cleaning attachment
attachment fitting
NZR 1.5 B1
thoroughly under running water. Hold the
.
.
together with the appliance head
and it will fall off.
. The appliance stops.
out of the interdental space
under running water.
by turning it a little so that
is aligned with the
. You can then remove the
off the attachment fitting
is pointing
all the way
and move the
in the
from the
GB │ CY │
9
:
.
■