Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

container and the clear tube with a blue cover to the rinse aid container).
It is prohibited to leave an activated device and an open water valve for a longer period of downtime in the
device operation.
9. PACKAGING, LOADING AND TRANSPORT
The washer is packaged in accordance with the applicable standards. The loading of the device onto means
of transport and the unloading should be carried out using appropriate lifting equipment and trucks. The
devices should be transported on covered means of transport. During transportation the washer should be
protected against movement, strong shock and other mechanical damage.
10. DISPOSING OF USED EQUIPMENT
Information for users about the proper principles of disposal of waste electric and electronic equipment
• Leave the old device in the store where you are buying a new device. Each store has an obligation
to take your old equipment free of charge if you buy new equipment of the same type and in the same
quantity. The only condition is to deliver the equipment to the store at your own expense.
• Take the used device to a collection point. You will find information about the nearest location on
the municipal website or bulletin board of the municipal office.
• Leave the device at the service point. If the repair of the device is uneconomical or impossible for
technical reasons, the service is obliged accept the device free of charge.
• Return used equipment without leaving your house. If you don't have the time or ability to transport
your equipment to a collection point, you can use the services of specialized companies.
Remember! Do not dispose of used equipment along with household waste. This could cause high fines.
The symbol of the crossed-out waste bin on the product, its packaging or the instruction
manual means that the product should not be disposed of to normal waste bins. The user is
obliged to hand over the used equipment to a designated collection point for proper
processing.

11. WARRANTY

The seller shall be liable under the warranty or guarantee. Damage resulting from the formation of lime
scale deposits in the device are not subject to repair under the warranty. Warranty exchange does not cover
such elements as: light bulbs, rubber components, heating elements damaged by lime scale, screws and
elements undergoing natural wear, e.g. rubber seals and all kinds of mechanically damaged elements. Any
damage of components resulting from improper use is also excluded from the warranty. The warranty is
automatically voided in the event of a broken warranty seal or independent repairs.
- 20 -

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Sp5020Sp5030

Inhaltsverzeichnis