Technical Data; Installation - GGG SP5010 Bedienungsanleitung

3. TECHNICAL DATA

Unit's equipment (page 2):
1 - Control panel, 2 - Dishwasher door, 3 - Bottom panel, 4 - Adjustable feet, 5 - Chamber, 6 - Drain hose,
7 - Water connection, 8 - Terminal box, 9 - Nameplate, 10 - Connection giagram label
Model
Dimensions
Power Supply
Frequency
Maximum Energy Consumption
Supply water pressure
Supply water temperature
Hardness of water in the water network
Water consumption
Boiler capacity
Tank capacity
Standard cycle duration
Noise level
Protection
Net weight
Power cord type H07RN-F
Wash water temperature
Rinse water temperature
The dishwasher has an automatic sanitization function (it is an integral part of the washing
cycle).

4. INSTALLATION

4.1. Positioning of the device
The device should be moved to the place of installation, unpacked and the package contents should be
checked. In the even any damage to the device or any of its elements is detected, this must be immediately
notified to the transport company. The packaging material must be kept away from children and pets, as they
may cause an accident. All materials used for the packaging of the device are environment-friendly and can be
safely stored in an appropriate place. Items intended for recycling are marked as follows:
• PE – polyethylene: external packaging, manual cover, protective packaging,
• PP – polypropylene: handles,
• PS – polystyrene foam: edge protection, package cover.
• Wooden and cardboard elements of the device should be left in places intended for this purpose in
accordance with the applicable laws.
It is prohibited to store the elements of the device and the device itself directly in the natural environment.
The device is made of stainless steel and the elements which can be easily removed. The plastic components
of the device are marked with an appropriate symbol.
All connections to the device must meet the standards applicable in the place of installation. The
manufacturer is not liable for any injuries or damage to the product resulting from failure to comply with
the standards applicable in the place of installation. Before installing the device, it is necessary to make sure
that the moisture-sensitive elements are properly secured against getting wet, e.g. during the cleaning of
the device. The device should be placed in the desired location and then the protective packaging should
be removed. The device should be leveled using a spirit level and four adjustable legs in order to ensure its
stability. Any other way of leveling the device should be approved by the manufacturer.
SP5010, SP5020, SP5030
565x665x835
230V/l
50 Hz
3400 W
2-4 Bar
10-55°C
5-6°dH
2,5 l/cycle
120/180 sec.
65 dB(A)
2
3x2.5mm
60-65°C (140-149°F)
82-90°C (181-194°F)
- 13 -
400V/3+N+PE
4900 W
5,5 l
26 l
IPX3
56 kg
2
5x1.5mm