Sanus VisionMount SF203 Handbuch Seite 12

4
Wire Management SF208/SF213 Only
Option A:
Thread cable through channels the secure with plate [16] and plate screws [17].
Option B:
Install plate [16] with plate screws [17]. Thread cable ties [18] through end holes in plate [16]. Arrange
cables then secure them with the cable ties [18].
NOTES: Pull the arm to its full extension before routing the cables through the channels, then loosely route
the cables. This will give the cables enough slack to prevent excess tension when adjusting the position of
the arm.
The SF208 is shown.
A
[16]
[17]
12
[17]
OR
[18]
B
[18]
6901-002128 <00>