Sanus VisionMount SF203 Handbuch Seite 11

3
Attach Bracket [02] to Wall Plate (SF203) or
Arm Assembly (SF208/SF213) [01]
3-1
[01]
3-2
3-3
6901-002128 <00>
[11]
[14]
[12]
[13]
[14]
[08]
[10]
[09]
[10]
[02]
[12]
[11]
Fit nut [11] and cover [14] into underside of mount
[01]
NOTE: The SF213 is shown.
Place washer [13] and pivot pin [12] onto mount
[01].
NOTE: The SF213 is shown.
[01]
CAUTION:
step!
Fit mounting bracket [02] onto pivot pin [12]. Slide
washers [10] and spacer [09] onto mounting bolt
[08] and fi t bolt through mounting bracket [02] and
pivot pin [12] until it meets nut [11].
Fit cover [14] over mounting bolt [08].
Use hex key [15] to tighten mounting bolt [08] and
secure mounting bracket [02] to arm [01].
NOTE: The SF213 is shown.
[01]
You will need assistance with this
[15]
11