Prioritising Programmes - Intermatic GRÄSSLIN talento smart B15 Bedienungsanleitung

PRIORITISING PROGRAMMES

You can use prioritisation to specify the order that the programmes on the device run in. For example, a
daily switching command can be executed but a higher priority can be defined so that on certain days or
periods, other switching times apply.
Example
A daily programme switches the device on every day from 8:00 a.m. to 5:00 p.m. If, for example, you
do not want the device to switch on at the weekend or on a holiday, create a programme with a higher
priority for these days. This programme takes precedence over the other settings.
By default, the priority is specified as follows:
• Without date
− Very low
• A period
− Medium
• With a defined date (e.g. 01.01.2016)
− High
The following priorities can be set:
• Very low
• Low
• Medium
• High
• Very high
EN
95