Troubleshooting - Imperia PastaFacile Gebrauchsanleitung

CLEANING AND MAINTENANCE BEFORE EACH TIME OF USE
Cleaning is the only type of maintenance normally required. Accurately clean all the components intended
to be used only with a dry cloth or a soft brush.
AFTER FITTING THEM AND STARTING THE PASTAFACILE the cleaning operation can be completed by
passing a small portion of dough between the turning rollers of the pasta machine (to remove any remai-
ning dust). This operation is advisable on all the accessories that are to be used.
WARNING!
The dough used for these operations must obviously be thrown away.
The PastaFacile motor, the pasta machine and all accessories should NEVER be washed using water
or detergent. NEVER wash any component of these machines in a dishwasher..
CLEANING AND MAINTENANCE AFTER EACH TIME OF USE
MOVE THE PASTAFACILE SWITCH TO "0" AND DISCONNECT THE POWER LEAD PLUG FROM THE CUR-
RENT SOCKET. Accurately clean all the components used with a dry cloth or a soft brush, to remove any
remaining pasta or flour.
NEVER remove remaining pasta or flour with pointed tools or cutlery.
NEVER wash the PastaFacile, pasta making machine and accessories with water or detersives.
Make sure that all components are perfectly clean before storing them after use.
Check that none of the following problems has occurred:
PROBLEM
Does the motor fail to start?
Does the motor stop when the
device is running?
Does the gear motor wobble
abnormally when it is working?
If the problems cannot be solved using the table above, please contact your Authorised Imperia Retailer.
Nous vous félicitons de l'excellent choix que vous avez fait. Le motoréducteur
adaptable à tous les modèles manuels de machine à pâtes et ses accessoires,
permettra de transformer votre machine manuelle en motorisée.
LE PRESENT MANUEL FAIT PARTIE INTEGRANTE DE LA MACHINE.
Avant de procéder à toutes opérations, lire attentivement TOUTES les normes de sécurité, les instructions
et les conditions de garantie indiquées ci-après. Toutes utilisations de la machine non prévues par le présent
manuel d'instructions doivent être considérées comme incorrectes et impropres.
L'utilisation impropre du moteur PastaFacile peut comporter des conditions de danger; il est donc conseillé
de conserver avec soin et à la portée de la main ces instructions pour les consulter en cas de besoin.

TROUBLESHOOTING

LIKELY CAUSE
Plug or power lead connector
disconnected or not connected
correctly
Switch
in position "0"
Motor overheated due
to excessive effort or prolonged
blockage
Has the guide bracket been
fastened firmly
The guide bracket retaining lever
does not compress the gear
motor against the pasta machine
! AVERTISSEMENTS !
9
REMEDY
Insert the power lead plug or
connector correctly
Press the switch to position
"I" or "II"
Move the switch to position "0",
then disconnect the power lead plug
from the socket. Wait a moment for
complete motor cooling and reconnect
the power lead plug in the socket
and press the switch to one of the
running conditions.
N.B. If the plug is not disconnected
from the power socket the motor
cannot resume its function.
Improve the fastening of the
guide bracket to the pasta
making machine
Position the retaining lever
as shown in the assembly
procedure Fig. L
®