SANUS VuePoint F18 Handbuch Seite 6

1
Select TV Hardware and Mount TV Brackets
1-1
Select the hardware diameter and length
A
1-2 Attach bracket to a TV with a fl at back
A
[01]
6
Your TV type will help you determine which hardware
confi guration to use.
Installation option without spacers (TVs with fl at backs)
A.
Installation option using spacers (TVs with irregular
B.
backs)
Hand thread screws into the threaded inserts on the back of
your TV to determine the correct screw diameter (M4, M6, or
M8).
CAUTION: Avoid potential personal injuries and property
damage! Verify that there are adequate threads to secure the
brackets to the monitor. If you encounter resistance, stop
immediately and contact customer service. Use the shortest
screw and spacer combination to accommodate your needs.
Using hardware that is too long may damage your TV.
B
Ensure the bracket is level on the back of the TV.
NOTE: If the hole pattern on your TV is 75mm x 75mm the
washers [16, 17] will not be used.
If you require additional space for cables, recesses, or
protrusions, choose confi guration B.
M4/M6/M8
75mm x 75mm
[01]
[01]
[16, 17]
[07, 09, 10, 12]
[07]
6902-002022 <00>