Inhaltsverzeichnis
Werbung
1) Connect the AP and PC, and ensure that the PC and AP can communicate
with each other properly.
2) Launch your PC's web browser. In the address bar, enter your AP's IP
address and press Enter.
3) At the AP Login Screen, type the user name and password, and the
verification code, select the language (English and Chinese are supported at
present), and click Login. The default username and password are
case-sensitive:
Username: admin
Password: password
Converting your Stand-alone AP (FAT) to a Managed AP (FIT)
If you plan to run this AP in Managed AP mode with a wireless controller, go to the web
page http://www.3com.com to get the instructions.
4 Optional
Optional POE injector
Optional POE injector
802.3af Gigabit POE injector
Optional Antennas
Optional Antennas
2dBi Dual-Band Omni Antenna Kit
6/8dBi Dual-Band Omni Antenna
18/20dBi Dual-Band Panel Antenna
8/10dBi Dual-Band Panel Antenna
Optional Antenna Cables
Optional Antenna Cables
Ultra Low Loss 6 Foot Antenna Cable
Ultra Low Loss 20-Foot Antenna Cable
Ultra Low Loss 50-Foot Antenna Cable
R-SMA to SMA 6" Antenna Cable
3CNJPSE-GIG
3CWE590
3CWE591
3CWE596
3CWE598
3CWE580
3CWE581
3CWE582
3CWE586
11
3C Number
3C Number
3C Number
Werbung
Inhaltsverzeichnis
