Herunterladen Inhalt Inhalt Diese Seite drucken

MSI H61I-E35 V2/W8 Serie Bedienungsanleitung Seite 19

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 61
Installing Memory Modules
.
unlock the dIMM slot by pushing the mounting clips to the side. Vertically
insert the memory module into the dIMM slot. the memory module has an
off-center notch on the bottom that will only allow it to fit one way into the
dIMM slot.
2.
push the memory module deep into the dIMM slot. the plastic clips at each
side of the dIMM slot will automatically close when the memory module is
properly seat and an audible click should be heard.
3.
Manually check if the memory module has been locked in place by the dIMM
slot's side clips.
IMportANt
*
to ensure system stability, memory modules must be of the same type and
density in dual-Channel mode.
*
due to the hardware limitation, you should follow the installing procedures: first
memory modules, then graphics card. While uninstalling, remove graphics card
first if necessary.
Notch
Volt
MS-7677
9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis