Possible Cause - Roca 060103 Gebrauchsanleitung

always contact our Customers’ Technical Assistance service and
do not try to undertake the repairs yourself.
TROUBLESHOOTING
Should you notice any of the functions not operating as des-
cribed in this manual, we recommend you check through the
following table before contacting our Customers’ Technical
Assistance service.
By doing this, you will easily see whether the problem is really
due to a fault or simply to the incorrect use of the controls, in
which case you will be able to use the spa immediately.
Problem
None of the functions
switches on.
AFTER-SALES SERVICE AND GUARANTEE
If the above table does not help you to solve the problem, you must contact either Compañía Roca Sanitario, S.A.’s technical assistance
service for customers, or the dealer from whom you purchased the bath. Please also make use of the after-sales service if you have
any doubts about how the unit works.
This bath carries a guarantee, the terms and conditions of which must be read through carefully in order to know exactly what your
rights are. Our Customer’s Technical Assistance service will carry out all the necessary repairs and parts replacement according to
the terms in the guarantee.

Possible cause

Failure in electricity supply.
Magnetothermal switch or
differential has cut out.
Insuficient water in the bath.
What to do
Check mains supply voltage.
Set them to circuit closed position (ON).
If they cut out again, a thorough check will be
necessary to find the cause.
Fill bath.
10