auna Bonbon Handbuch Seite 19

Programming a track list
Up to 20 tracks can be programmed for disc play in any order.
Be sure to press the "STOP" button before use.
1. Press the "PROGRAM" button, the display will show "01" and fl ash.
2. Select desired track by using the "SKIP +" or "SKIP -" button.
3. Press the "PROGRAM" button again to confi rm desired track into the
program memory.
4. Repeat step 2 and 3 to enter additional tracks into the program memory.
5. When all the desired tracks have been programmed. Press the "PLAY /
PAUSE/ BT" button to play the disc in the order you have programmed.
6. Press the "STOP" button twice to terminate programmed play and the
program indicator will turn off .
Repeat
Press the "REPEAT" button before or during playing CD, a single track or all
the tracks can be repeated. Each press switches the repeat mode as follows:
1 REPEAT 1
2 REPEAT ALL
3 NORMAL PLAYBACK
REPEAT 1 REPEAT ALL
AUX-IN
1. Connect a 3.5 mm Aux-in cable to this appliance and your devices 3.5
mm output socket.
2. Switch the function selector to CD or Radio.
3. Press play on your device and enjoy.
NOTE: (3.5 mm Aux-in cable is not included).
The repeat indicator is fl ashing.
The repeat indicator is steadily on.
NORMAL
PLAYBACK
EN
19