Pioneer SGY-PM910ZW Bedienungsanleitung Seite 22

EN
Switch to dual power meter mode
[Method 2] Switch the mode on SGX-
CA500
Do operations 1 to 5 described on
Page 15 to Page 16 , and go to
the mode switching screen.
1. If the left and right sensors
are checked, tap [Dual Power].
The mode switching completion screen
opens.
22
In this state, the cyclocomputer is still
not paired with the sensor. Refer to
Page 24 regarding how to pair.
If the mode cannot be switched, refer
to Add in the sensor list of SGX-CA500
in page 17.
When the mode is switched, the LEDs
of the sensors light orange for 10
seconds.