Charging Your Battery - Qstarz SR-Q2100 Schnellinstallationsanleitung

English
.................................................................................................................................................................................................................................................................................................
Time: Timer will only measure the moving time. Your stop time will be eliminated.
Average Speed: Average Speed will show the Moving Average Speed eliminating stop time.
Current Time : It will show the local time depending on time zone setting through
Software
F. Charging your battery
For the first time using the SR‐Q2100, please charge battery until
it is fully charged. Connect the supplied USB mini cable it to the
power jack (mini USB type) and recharge through PC USB. This
will begin to charge the battery. Charging time is about 4 hours
typically.
‐ When recharging the battery. The battery icon will cycle from
bottom‐ up
‐ When the battery icon shows all 3 blocks, the battery has reached a full‐charge state
‐ When the Battery indicator has dropped to one block, battery power is in low status.
Please recharge.
NOTE 1: The best and the fastest way of recharging the device is to turn the power off
before charging.
NOTE 2: To be sure the data is secured, please do charge your battery when the battery
has dropped to one block
NOTE 3: Please recharge the battery on a regular interval if the unit is not used for a long
time.
.................................................................................................................................................................................................................................................................................................
6
www.Qstarz.com