General Precautions - Motostar MP100 Installationsanleitung

GENERAL PRECAUTIONS

Follow all instructions. Improper installation may lead to serious
bodily injuries. Before continuing, also read the precautions in the
This product must only be used for its specifi cally intended
purpose. Any other use is dangerous. LABEL HABITAT SAS
is not liable for any damage caused by improper, wrongful or
unreasonable use of this product. • This manual's product
is defi ned by machinery directive2006/42/CEas "partly-
completed machinery". Partly-completed machinery is a
set that almost constitutes a machine, but which, alone,
cannot ensure a clearly defi ned application. a set that
almost constitutes a machine, but which, alone, cannot
ensure a clearly defi ned application. Partly-completed
machinery is only destined to be incorporated or assembled
to other machinery or other partly-completed machinery
or apparatuses to build machinery that is regulated by
Directive 2006/42/CE. The fi nal installation must comply with
European directive 2006/42/CE and European reference
standard EN 16005.Given these considerations, all
procedures stated in this manual must be exclusively
performed by expert, qualifi ed staff.• Make sure that
people are not entrapped between the gate's moving
and fi xed parts due to the gate's movement. This can be
CAUTION: Important safety instructions.
operating and maintenance manual.
achieved if the corresponding distance is less than 8 mm.
However, the following distances are considered safe to
prevent entrapment of the following body parts:
- fi ngers, more than 25 mm;
- feet, more than 50 mm;
- head, more than 300 mm;
- for the entire body, more than 500 mm.
If you cannot achieve these distances, you will need to
take suitable safety precautions. • Before installing the
operator, check that the gate is in proper mechanical
conditions, that it is properly balanced and that it properly
closes: if any of these conditions are not met, do not
continue before having met all safety requirements • Make
sure that you have fi tted opening and closing positive stops
• Make sure the operator is installed onto a sturdy surface
that is protected from any impacting shocks • If necessary,
fi t suitable opening and closing mechanical stops • If the
operator is installed lower than 2.5 from the ground or
from any other access level, fi t any protections and signs
to prevent hazardous situations• Do not fi t the operator